Nissan Qashqai 2010 1.46 Adaptation -

Ensures the ECM knows the exact "stop" point of the throttle butterfly. Turn ignition ON. Action: Turn ignition OFF and wait at least 10 seconds.

If you are performing maintenance on a 2010 Qashqai (J10), you must perform these "Learning" steps to ensure a stable idle and proper fuel management. 1. Accelerator Pedal Released Position Learning Nissan Qashqai 2010 1.46 Adaptation

Do this twice to ensure the ECM registers the released position. 2. Throttle Valve Closed Position Learning Ensures the ECM knows the exact "stop" point

You should hear the throttle motor move during those 10 seconds. 3. Idle Air Volume Learning (IAVL) If you are performing maintenance on a 2010

CVT jerking, timing chain stretch, and faulty window regulators ⚠️ Important Maintenance Note

This step helps the ECM learn the voltage signal when the pedal is fully released. Engine off, ignition ON for at least 2 seconds. Action: Turn ignition OFF and wait at least 10 seconds.