Nb - Table Assembly (05-25-22).mp4 Instant

: Hardware can loosen due to the vibration of moving the workstation; connections should be checked and re-tightened periodically. Assembly Instructions TABLE

: For models with power kits (like the 750 or 1,250 inverters), the unit is mounted and the switch is set to "auto remote" mode.

The assembly typically focuses on a modular, heavy-duty frame designed to hold power kits and industrial equipment. According to the NB Series Assembly Manual , the process generally follows these steps: NB - Table Assembly (05-25-22).mp4

: The main tabletop (laminated surface) is attached to the frame. A shelf bracket is typically secured to the underside of the surface using #10-¾” screws. Support & Power Integration :

: The vertical mast is secured to the base, which often features large industrial casters for mobility. : Hardware can loosen due to the vibration

: To avoid warping the frame, tighten all bolts in a sequential, circular pattern rather than fully tightening one at a time.

: Must be mounted to the underside of the shelf before the shelf is attached to the mast. According to the NB Series Assembly Manual ,

: Always ensure the table is on a flat, level surface and that casters are locked before use.