Isis-proteus-7-7

Place pins on the edges of your 2D box. You can rotate them (using the keypad + or - ) so the connection point faces outward. : Double-click each pin to open the Edit Pin dialog.

Click and drag on the schematic sheet to draw the shape of your component. : Select Component Pin Mode (the icon with a dot and a line). isis-proteus-7-7

: Click Next to link a PCB footprint (from ARES) if you plan to design a board later. Save to Library : Place pins on the edges of your 2D box

Enter a (e.g., VCC, GND) and a Pin Number that matches the physical footprint. Create the Device : Click and drag on the schematic sheet to

: Use standard codes like U for ICs, R for resistors, or C for capacitors.

: Give your component a unique name (e.g., "MY_CHIP_77").

Click to finish. Your new "piece" will now appear when you search the library with the Pick from Library (P) button. Alternative Methods