: This is usually the first piece installed. Cut it to the width of the opening using a hacksaw. Secure it to the top jamb or ceiling header using screws, ensuring it is perfectly level. Lower Track :
Lift the (the one further inside the closet) first. instruktsiia po ustanovki dveri kupe
For , align the lower track with the top one using a level or plumb line. : This is usually the first piece installed
Angle the top into the rear groove of the upper track, then lower the bottom rollers into the rear groove of the bottom track. Repeat the process for the . 4. Final Adjustments Lower Track : Lift the (the one further
: If the door doesn't sit flush against the wall, locate the adjustment screws on the bottom rollers.
: Screw the roller brackets to the top (and sometimes bottom) of the door panels, usually 1–1.5 inches from the side edges. Mount the Panels :
: Typically, the combined door panels should be at least 10 cm wider than the opening to provide a sufficient overlap when closed. 2. Installing the Tracks