Copy the extracted firmware file (usually named MstarUpgrade.bin or similar) directly to the of the USB (do not put it in a folder). 🛠 Installation Methods
: Multi-part archives like yours cannot be opened individually. You must download all parts (Part 01, Part 02, etc.) into the same folder on your computer.
Depending on whether your TV is currently functional or stuck on a logo (boot loop), use one of the following methods: Insert the USB drive into the TV's USB port. Copy the extracted firmware file (usually named MstarUpgrade
(or sometimes the CH+ button) on the TV panel, not the remote. While holding the button, plug the power cord back in.
main board is often found on technical repositories like KazmiElecom or specialized firmware forums. If you only have Part 02, you must find the matching Part 01 from the same source to successfully extract the data. How to update any Samsung TV's firmware using a USB drive Depending on whether your TV is currently functional
Continue holding until you see an "Upgrading" bar or the power indicator starts flashing.
: Do not turn off the power or remove the USB during this process, as it can permanently damage the main board. 🔍 Finding the Download Link Firmware for Condor models using the JUC7.820.00169579 main board is often found on technical repositories
To download and install the (specifically Part 02), you will typically need to locate the multi-part archive from technical forums or repository sites, as manufacturers often split large firmware files into several parts (e.g., .part01.rar, .part02.rar) for easier hosting. 📥 Downloading & Preparing the Files