Dcs_fa_18c_hornet_episode_3_preflight_startup_t... < 2027 >

: Power on the Radar (set to OPR), RWR , IFF , and Data Link systems. 4. Taxi and Takeoff

: Press the Takeoff Trim button and set the flaps switch to HALF .

: Press the FCS Reset button. Perform the Flight Control System BIT test by holding the FCS BIT switch on the right wall while simultaneously pressing the FCS OSB on the right DDI. dcs_fa_18c_hornet_episode_3_preflight_startup_t...

This summary covers the essential procedures from the tutorial. It details how to bring the Hornet from a "cold and dark" state to active flight. 1. Preflight and Initial Power

: Advance throttles to Military Power (or Full Afterburner). Rotate at approximately 140–150 knots (7 degrees pitch) and retract landing gear and flaps once a positive rate of climb is established. : Power on the Radar (set to OPR),

For a more comprehensive, printable reference, you can use the F/A-18C Hornet Quick Start Checklist or the community-favorite Chuck’s F/A-18C Guide. F/A-18C Hornet Startup in 60 Seconds!

: Ensure the Oxygen (OBOGS) is on, the Ejection Seat is armed, and the Parking Brake is released. : Press the FCS Reset button

: Turn the APU switch to ON. Wait for the green "Ready" light before attempting engine crank.